42W 1050mA 12-40V IP67 Constant Current LED Driver

FEATURES

• Universal AC Input Range 90~264VAC.
• Constant Current mode.
• Active PFC design.
• Protections: OVP / SCP.
• Fully Insulated Case with IP67 rated.
• Meet application for ErP (EU) 2019/2020.
• No-Load power consumption < 0.5W at 230VAC.
• Set up time < 0.5S at 230VAC.

APPLICATION

• Suitable for indoor and outdoor LED lighting application, such
as down lights, spotlights and panel lights

IP Class

IP67

Constant Current

1050mA

TECHNICAL DATA

Output:

• DC Voltage: 40V
• Rated Current: 1050mA
• Rated Power: 42W
• Efficiency (Typ.): 84%
• DC Voltage Range: 12-40V
• Ripple & Noise (Max.): 300mV
• Current Tolerance: ±5%
• Set up Time (Max): < 0.5S / 230VAC, at full load.

Input:

• Rated Voltage: 100 ~ 240VAC
  
• Voltage Range: 90 ~ 264VAC
  
• Frequency Range: 47 Hz ~ 63 Hz
• AC Current: 0.48A at 115VAC, 0.24A at 230VAC
0.95 at 115VAC, >0.9 at 230VAC at full load.

• Total Harmonic Distortion: THD < 10% at 230VAC, full load.
  
• No-Load Power Consumption: < 0.5W at 230VAC
  
• Inrush Current (Typ.): Cold Start 25A (Td=40us measured at 50% Ipeak) at 230VAC
  
• Max. Number of PSUs on Circuit Breaker B type : 21 units (10A) / 34 units (16A) / 53 units (25A), C type : 21 units (10A) / 34 units (16A) / 53 units (25A), D type : 34 units (16A) / 53 units (25A) at 230VAC
  
• Leakage Current: (Typ.) <1mA / 230VAC
power>power>

Protections:

• Short Circuit Type: Recovers automatically after fault condition is removed
  
• Over Voltage: 44V~60V - Type: Output Voltage limiting, auto-recovery

Environment:

• Operation Temp.: -20 ~ +40°C(Refer to output load derating curve).
  
• Operation Humidity: 20% ~ 90% RH non‐condensing.
  
• Storage Temp.: -40 ~ +80°C
  
• Storage Humidity: 10% ~ 90% RH
  
• Vibration: 10 ~ 500 Hz, 2G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes

Dimensions:

• Lenght: 110mm
• Width: 36mm
• Height: 25mm
• Lenght of the wires: 150mm
• Weight: 156g