36W 24V Constant Voltage LED Driver

ALCV036-024-001

FEATURES

•  Universal AC Input Range 90 ~ 264VAC
•  Class II Power Design without Earth Pin
•  Fully Isolated Plastic Case
•  Protections: OCP/SCP/OTP/OVP
•  No Load Consumption <0.5W at 230VAC
•  Withstand 300VAC Surge Input for 5 Seconds
• Secundary Switch Protection
• IP20
  

IP Class

IP20

Technical Data

• DC Voltage Range: 24V
• Rated Current: 0-1.5A
• Rated Max. Power: 36W
• Voltage Tolerance: ± 5%
• Ripple & Noise (Max.) note.2: 240 mVp-p
• Efficiency (Min): 85% at 230VAC full load
• Set up Time (Max): < 1S / 115VAC at full load / < 0.5S / 230VAC at full load
• Rated Voltage: 100 - 240VAC
• Voltage Range: 90 - 264VAC
• Frequency Range: 47 Hz ~ 63 Hz
• AC Current (Max.): 1A at 115VAC / < 60A at 230VAC
• Inrush Current (Max.): < 30A at 115VAC / < 60A at 230VAC
• Leakage Current: < 0.25mA / 240VAC
• No Lead Consumption: < 0.5W at 230VAC
• Over Current: 110% - 150% Constant current limiting, auto-recovery
• Short Circuit: Hiccup mode, recovers automatically after fault condition is removed
• Over Temperature: Shut down o/p voltage, recovers automatically after temperature goes down
• Over Voltage: 29-33V (Protection type: Shut down o/p voltage, recovers automatically after
      voltage goes down)
• Operation Temp.: -20°C ~ 40°C (Refer to output load derating curve)
• Operation Humidity: 20% ~ 90% RH non-condensing
• Storage Temp & Humidity: -20 ~ +80°C ,10% ~ 90% RH