35W 2x350mA DIM DALI BAG DRIVER CCD235-35LS-01/220-240/DALI

10078993

Performance characteristics of BAG LED driver, 2-channel, dimmable

• Dimmable 2-channel ECG for constant current operation of LED modules
• Selection of additional output currents by means of parallel connection of the output channels
• SELV equiv. output voltage ≤ 60 VDC
• Very high efficiency of up to 91 % (100 % load)
• Soft start and low output current ripple
• For use in luminaires of protection class I
• ECG extensively protected against abnormal operating conditions at the output e.g. short-circuit, open circuit or overload
• Suitable for direct current operation and application in combination with central battery installations
• Overvoltage protection of the DALI and 1–10 V interfaces up to 264 VAC
• Push-Dim function of DALI interface: switching and dimming via push-button
• Settable recovery function: automatic switch-on after mains failure
• Dimming range: 1 ... 100 % luminous flux
• PWM dimming with 500 Hz for flicker-free light and prevention of stroboscopic effects
• Identical dimensions for dimmable and non-dimmable versions
• Certified as thermally protected device
• Conformance with international regulations, regarding safety and operation, electromagnetic compatibility and immunity to interference
• Nominal service life: 50,000 h with failure rate ≤ 10 % and operation at tc=tc,max

IP Class

IP20

Constant Current

350mA

Technical data

Mains voltage supply

• Rated voltage range 220 ... 240 V
• Max. permanent voltage range (continuous) 198 ... 264 V
• Rated frequency 0 / 50 ... 60 Hz

Battery operation

• Voltage range for continuous operation 198 ... 278 VDC
• Lowest limiting value for temporary operation 176 VDC/ 0.5h

Mains overvoltage

• Overvoltage protection 350 VAC / 2 h
• Automatic switch-off of the LEDs at appr. 320 VAC

Protection against voltage peaks

• Voltage peaks L - N 1 kV
• Voltage peaks L/N -PE 2 kV

Starting time

• Time to 100% luminous fl ux < 0.5 s

Total harmonic distortion

• At 100% to ECG-output < 10 %

Output data

• Tolerance of output current +/- 5 %
• Max. ripple of output current +/- 10 %
• Max. wire length to LED module 2 m
• Galvanic separation to mains input yes, test voltage 3.75 kV

Protection functions output side

• Overload operation yes; limitation of the output voltage and reduction of output current
• Underload operation / Short-circuit operation yes; output channel swich-off in case of permanent operation, restart after mains interruption
• Open-circuit operation yes; output voltage max. 60 VDC (SELV equiv.)
• Hot plug-in allowed; protection of module has to be ensured

Lifetime

• Operation at tc = tc,max 50.000 h; failure rate ≤ 10 %
• Operation at tc = tc,max - 10 K 100.000 h; failure rate ≤ 10 %

Dimming operation

• Dimming interfaces, depending on ECG model DALI & Push-Dim or 1-10V
• Control current for 1-10 V versions ≤ 0. 6 mA
• Overvoltage protection of interface 264 VAC
• Galvanic separation to output side yes, test voltage 3.75 kV
• Stand-by power losses ≤ 0.3 W
• Dimming range for luminous fl ux 1 ... 100 %
• Dimming technology 500 Hz (PWM)
• Max. umber of ECG for Push-Dim control 25

Connection terminals

• Type 90°-terminal with key 1)
• Wire cross section 0.5 mm² - 1.5 mm²
• Wire stripping length 7.5 mm - 8.5 mm

Terminal protect device

• Max. surface temperatur acc. EN 61347-2-13/C5c + 110° C

Degree of protection

• ECG-housing IP 20