75W 24V TRIAC Constant Voltage LED Driver

ALCV075 LED DRIVER SERIES - ALCV075-024-65-DIM

TRIAC DIMMABLE IP65 CONSTANT VOLTAGE LED DRIVER

FEATURES

APPLICATION

• Can be used with 24V light sources for example, LED Strips (aLED KIDEFLEX)
• Indoor or outdoor installations

IP Class

IP65

Technical Data

Output

Voltage Range 24VDC
Ripple & Noise (Max.) note.2 0.5Vp-p
Voltage Tolerance ± 5%
Dimming Range 5%~100%
Rated Current 3.2A
Rated Power 76.8W
Efficiency (Typ.) note.1 84%
Set up Time (Max) 0.5S / 230VAC at full load

Input

Rated Voltage 220~240VAC
Voltage Range 205~256VAC
Frequency Range 50/60 Hz
AC Current (Max.) 0.9A at 230VAC
Power Factor > 0.45 at 230Vac with full load.
Inrush Current (Typ.) Cold Start 60A at 230VAC
Leakage Current (Typ.) <1mA / 230VAC

Protections

Over Voltage 110 % - 130% Output voltage limiting, auto-recovery
Over Current 120% - 150% Constant current limiting, auto-recovery
Over Temperature 110°C - 125°C Temperature limiting, auto-recovery
Short Circuit Hiccup mode, recovers automatically after fault condition is removed

Environment

Operation Temp. -20°C ~ 45°C (Refer to output load derating curve)
Operation Humidity 20% ~ 90% RH non-condensing.
Storage Temp. -20 ~ +80°C
Storage Humidity 10% ~ 90% RH

NOTES

1. All parameters NOT specially mentioned are measured at 230V/50HZ AC input, rated load and 25°C ambient temperature.
2. Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf & 47uf parallel capacitor at 100% duty output
3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Dimenions

Lenght 137,5mm
Width 47mm
Height 32mm
Weight 355g

Safety

Safety Standards meet EN61347-1,EN61347-2-13
Withstand Voltage I/P - O/P : 3.75K VAC
Isolation Resistance I/P-O/P : 100M ohms / 500VDC at 25°C
EMC Standards note.3 meet EN55015,EN61000-4-2,3,4,5,6,8,11 ,EN61547

Lifetime

MTBF 100K hours min. @Ta=25°C